Everyone's Preference: 2020 Toyota Tacoma Led H

10-Min Quick Installation, non-polarity and plug-n-play design, this H11 led headlight conversion kit can easily be installed within 10 minutes, no tools or modification needed

300% High Brightness, using superior CSP chips, this H11 led bulbs combo provides up to 300% brighter and 6500K whiter clearer vision, ditching your yellow and dim stock lights

1:1 Perfect Beam Pattern, vertical aligned led components design, perfectly mimic the original pattern, delivering wider angle and farther range light on the road, no blinding oncoming traffic

50,000 Hours Long Lifetime, top grade materials designed to exceed minimum heat-transfer requirements, ensuring durability and superb performance, less replacement for drivers seeking toughness

Fits for 99% of vehicles, with built-in driver and CANbus ready design, the filter system may not be 100% accurate, please refer to owner's manual or original bulb's part number

【350% Brighter Than Halogens】 Equipped with High luminous efficacy CSP chips,10,000lm per set and 6000K cool white, E1 H11 LED headlight bulb features a better performance on brightness, providing further and wider visibility for you to see the deer, wild animals, falling rocks or other obstacles in advance to ensure safer driving at night

【Ideal Beam Pattern】 Nilight H9 LED headlight bulb enhances super focused beam pattern for optimal light shape and clearer visibility, no dark spots or shadow areas, no blinding or glare to oncoming drivers, which avoids driver distraction caused by scattered light problem to ensure driving safety, making it the optimal LEDs to replace your factory bulbs

【50,000 Hours Lifespan】 65% energy saving, brighter light output with much less power consumption. Thanks to premium aviation aluminum heat sink with optimized 10,000RPM silent turbo cooling fan, H8 LED headlight bulb efficiently speeds up heat dissipation to prevent bulbs from overheat to ensure superior performance, prolonging lifespan up to 50,000 hours, equivalent to 100 halogen bulbs, free you from the trouble of frequent replacements

【10 Mins Easy Installation】 Bulid-in driver and non-polarity plug for taking up less space in housing, 1:1 mini size as original halogen bulbs for higher compatibility, real plug and play, quick install in 10 mins. H11 LED headlight kit smoothly fits into vehicle's housing and factory sockets even with limited space in headlight housing, no retrofitment required, no radio interference

【Superb Performance】CANbus ready, fit with 99% vehicles without error or flickering issue. IP67 feature makes it work perfectly on any severe weather. Fit for H11/H9/H8/H16 headlight bulbs replacement. Note:H11 are usually fit on most vehicle models as low beam, H9 fit as high beam, H8/H16 fit as fog lights

Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.

Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”

Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires

Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack

Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase.

Fit Type: Universal Fit

New Design: Features separated running light display and stop turn light display by using halo glow ring, add on unique outlook and differences. Also each light use more led chips than the classic one, giving more brightness and reliable visibility for safety.100% DOT compliant.

7 Full Functions: Combined full functions of stop turn tail light, side marker, side reflector, rear reflector, and license plate light. Fit most 12V DC vehicles within 80 inch, like trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, bus, lorry, van, caravan, snowmobile

IP68 Submersible: LEDs and circuit board inside are fully waterproof sealed to work under water without electric short risk. Light housing also features water drainage for added protection.

All-in-one Kit: Comes with everything for your straight-forward installation, include square trailer lights, amber clearance light, license plate bracket, trailer wiring harness, reflective stickers, and different types of mounting hardware for handy use

Easy Installation: Light mounting: stud-mounted design, light with license light on driver side, the other on passenger side. Wire connection: color coded wires, just color to color and white wire with ring terminals can be grounded at its own mounting stud or to vehicle frame.

Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer.

Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Durable for all weather elements.

Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night.

Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light.

Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame

【500% Brighter Than Halogen】Automotive-Grade led chips reaches up to 500% per set, 5 times brighter than your original halogen bulb, 1.5 times brighter than other h11 led bulbs. 6500K cool white H11 LED headlight bulbs allows you to see further and clearer

【Perfect Tangent】Ultra-thin 0.04 inch copper board reduces glaring to ensure maximum light output and cut-off line is the perfect angle. No dark spots or foggy light. While ensuring the brightness during driving, H11 low beam will not affect the sight of oncoming vehicles

【2 Times Wider Vision】H11 LED headlight high power provides you with 2 times view range, giving you unparalleled lighting output, whatever running on straightaway, right-hand bend or left-hand bend. h11 led headlight bulb provides clearer and better vision for driver to see the wild animals, falling rocks or other obstacles at night in advance to reduce the possibility of danger

【Easy Installation】Nilight H11 LED headlight bulb is almost 1:1 mini design same as halogen, perfectly fits into your housing and factory sockets without any modification, just plug and play. If you are not sure about the car model and need a decoder, please check your owner's manual or the part number on your original bulbs to confirm the bulb type(Note: H11 LED headlights are mostly suitable for low beam lights of cars)

【Longer Life】H11 led headlights adopt aircraft grade aluminum and 12,000RPM turbo cool fan to provide super cooling ability. IP67. Operating Temperature:-40 °F~185 °F. H11 low beam will last for 50,000 hours even though you drive for 6 hours in a row every day

featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc.

upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber or red light.

awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance.

highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse.

simple installation: black wire for ground, red wire for positive. just fix the black base with the flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.

Fit type: Universal Fit

Top LED: Each light has 12PCS upgrade Piranha LEDs, feature better heat dissipation, wider lighting angle, higher intensity light and extend a longer lifetime, features excellent bright light and extend a longer lifetime

Stand Out Brightness: Output 3 time brighter light than others. High brightness for Turn/Brake light, low brightness for Tail light. Improve visibility and ensure you a safer night

Easy Installation: Just surface mount the grommets & light setup, attach the 3-prong plug to light, and then connect the 3 wires lead. Hole size for surface mount is: 4. 3” diameter hole, 2” depth

Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack

Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase

Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety

Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare

Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse

Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting

Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack

Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.

Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light

Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance

Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse

To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center holeTo run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center hole. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center hole